MLE200 Leg Extension

Brand: Steelflex · Model: MLE200 · Category: Pin Loaded

The Steelflex MLE200 Leg Extension is a full-commercial seated leg extension machine from Steelflex’s Mega Power series, built for commercial gyms that want a quad-isolation machine with precise start-position control. A seated start-position adjustment and a wide range of motion at the ankle roller let every user set the exercise correctly, and the ergonomic back pad supports without compressing. It carries a 97.5 kg (215 lb) weight stack as standard (143 kg (315 lb) or 189 kg (415 lb) optional), is rated for users up to 120 kg (264 lb) and occupies 132 × 100 cm of floor.

• Start position adjusts from the seat

• Wide range of motion at the ankle roller

• Ergonomic back pad and upholstery

• 97.5 kg stack, 143 or 189 kg optional

• 120 kg maximum user weight

The Steelflex MLE200 is the seated leg extension in Steelflex’s Mega Power full-commercial line, built to a high standard of adjustability. Members select a proper start position while seated, the ankle roller gives a wide range of motion at the knee, and the ergonomically shaped upholstery and back pad support the body without pressure points.

Who is this machine for?

The MLE200 suits commercial gyms, hotel and corporate fitness centres, physiotherapy and rehabilitation settings and premium home gyms in India that want to isolate the quadriceps safely. The start-position adjustment makes partial-range work possible for members rebuilding knee strength, and the 120 kg maximum user weight covers most users.

Muscles worked and key exercises

The leg extension isolates the quadriceps, all four heads, with no help from the glutes or hamstrings. It is the standard machine for quad hypertrophy, for strengthening the knee after injury under a physiotherapist’s guidance, and for pre-exhausting the quads before presses.

Build quality and adjustment

The start position adjusts from the seated position so no one has to climb off to change it, the ankle roller adjusts to leg length, and the back pad is shaped to fit the torso. The flat-belt drive gives a smooth resistance curve from the first pin to the full 97.5 kg stack.

Like every Mega Power machine, it is built on 50 × 150 mm oval steel tubing with a two-coat, electrostatically applied powder finish; 5 cm of rebonded foam under 15 mm of high-resilience foam with a CGPC PVC cold-latex cover, double stitched; dipped PVC handgrips; a flat-belt drive with a tensile strength above 2,280 kg; a 4 mm acrylic shroud; and noise-absorbing cushions under the weight stack. An instructional placard is fitted to every machine.

Space and installation

The MLE200 measures 132 × 100 × 167 cm (52" × 39" × 66") (L × W × H). Leave about 0.6 m of clear space on the user side for entry and exit and 0.5 m around the weight stack for pin changes. No power is needed. Luxe Fitness delivers, assembles and levels the machine and fits the weight stack on site.

Care and maintenance

Wipe the upholstery, handgrips and shroud after each session. Check the belt, pulleys and pivot bearings monthly, keep the guide rods clean and lightly lubricated as the manual directs, and tighten pad and handle fasteners. Book a service visit if the movement becomes rough or the stack catches on the guide rods.

Why buy from Luxe Fitness?

Luxe Fitness is backed by 28+ years of industry experience through ACME Fitness. We handle delivery, installation, servicing and spare parts across India, and you can see equipment at our showroom at 134/2 KH Road, Shanti Nagar, Bangalore. Warranty runs up to 5 years, with exact terms confirmed for your model.

Frequently asked questions

Is a leg extension machine bad for the knees?

Used with a sensible load and a start position that suits the knee, it is one of the safest ways to strengthen the quadriceps and is widely used in rehabilitation. Anyone with a knee injury should follow a physiotherapist’s advice on range and load.

What is the difference between the Steelflex MLE200 and MLC400?

The MLE200 extends the knee to train the quadriceps; the MLC400 is the seated leg curl that flexes the knee to train the hamstrings. Gyms usually place the two side by side.

What warranty does the Steelflex MLE200 have in India?

Luxe Fitness offers up to 5 years warranty on this machine, covering frame, major moving parts and upholstery on separate terms. Ask us for the warranty card for your exact model before purchase.

What is the price of the Steelflex MLE200 leg extension in India?

Pricing depends on the weight stack chosen, delivery location and installation needs. Call +91 80 4112 5757 or send an enquiry for a quote.

Steelflex MLE200 Leg Extension features

Movement

• Seated start-position adjustment: Set the range without leaving the machine.

• Wide range of motion: Ankle roller allows a full extension.

• Flat-belt drive: Smooth resistance with a tensile strength above 2,280 kg.

Fit and comfort

• Ergonomic back pad: Supports without compression.

• Adjustable ankle roller: Fits different leg lengths.

• Thick double-stitched upholstery: 5 cm rebonded foam plus 15 mm high-resilience foam.

Construction

• 50 × 150 mm oval steel frame: Two-coat electrostatic powder finish.

• 97.5 kg weight stack: 143 kg or 189 kg stacks optional, with noise-absorbing cushions and a 4 mm acrylic shroud.

Steelflex MLE200 Leg Extension specifications

Allow about 0.6 m of clear space on the user side and 0.5 m around the weight stack.

Steelflex MLE200 documents

The document below covers the Steelflex MLE200 Leg Extension. For the warranty card for your order, call Luxe Fitness on +91 80 4112 5757 or send an enquiry.

Buy the MLE200 Leg Extension from Luxe Fitness, Bangalore: call 080 4112 5757 or send an enquiry for price, delivery and installation.