MDR1300 Lateral Raise

Brand: Steelflex · Model: MDR1300 · Category: Pin Loaded

The Steelflex MDR1300 Lateral Raise is a full-commercial lateral raise machine from Steelflex’s Mega Power series, built for commercial gyms that want an isolation movement for the side deltoids. Pop-pin adjustment on the lateral arms fine-tunes the width to each user’s shoulders, and angled, inward-facing handles line the shoulder joints up with the pivots. It carries a 97.5 kg (215 lb) weight stack as standard (143 kg (315 lb) or 189 kg (415 lb) optional), is rated for users up to 120 kg (264 lb) and occupies 110 × 117 cm of floor.

• Pop-pin arm adjustment for shoulder width

• Angled inward-facing handles align joints with pivots

• Compact 110 × 117 cm footprint

• 97.5 kg stack, 143 or 189 kg optional

• 120 kg maximum user weight

The Steelflex MDR1300 is the lateral raise in Steelflex’s Mega Power full-commercial line, a machine that isolates the side deltoids far more precisely than dumbbells. The lateral arms adjust with pop-pins to match each user’s shoulder width, and the angled handles face inward so the shoulder joints sit over the pivots through the whole raise.

Who is this machine for?

The MDR1300 suits commercial gyms, hotel and corporate fitness centres and premium home gyms in India that want to round out a shoulder circuit. Its compact footprint fits between larger machines, the pop-pin adjustment suits narrow and broad users, and the 120 kg maximum user weight covers most members.

Muscles worked and key exercises

The lateral raise isolates the lateral (middle) deltoid, the muscle that gives shoulders their width, with the supraspinatus and upper trapezius assisting. Because the arms are supported, the machine keeps tension on the deltoid through the whole arc where dumbbells lose it at the bottom.

Build quality and adjustment

Pop-pin adjustment on each lateral arm sets the width to the user’s shoulders in seconds, the angled inward-facing handle keeps the joint aligned with the pivot, and the seat positions the shoulders at the right height. The flat-belt drive gives smooth resistance even with light loads.

Like every Mega Power machine, it is built on 50 × 150 mm oval steel tubing with a two-coat, electrostatically applied powder finish; 5 cm of rebonded foam under 15 mm of high-resilience foam with a CGPC PVC cold-latex cover, double stitched; dipped PVC handgrips; a flat-belt drive with a tensile strength above 2,280 kg; a 4 mm acrylic shroud; and noise-absorbing cushions under the weight stack. An instructional placard is fitted to every machine.

Space and installation

The MDR1300 measures 110 × 117 × 167 cm (43" × 46" × 66") (L × W × H). Leave about 0.6 m of clear space on the user side for entry and exit and 0.5 m around the weight stack for pin changes. No power is needed. Luxe Fitness delivers, assembles and levels the machine and fits the weight stack on site.

Care and maintenance

Wipe the upholstery, handgrips and shroud after each session. Check the belt, pulleys and pivot bearings monthly, keep the guide rods clean and lightly lubricated as the manual directs, and tighten pad and handle fasteners. Book a service visit if the movement becomes rough or the stack catches on the guide rods.

Why buy from Luxe Fitness?

Luxe Fitness is backed by 28+ years of industry experience through ACME Fitness. We handle delivery, installation, servicing and spare parts across India, and you can see equipment at our showroom at 134/2 KH Road, Shanti Nagar, Bangalore. Warranty runs up to 5 years, with exact terms confirmed for your model.

Frequently asked questions

Why use a lateral raise machine instead of dumbbells?

The machine keeps resistance on the side deltoid through the whole movement and removes the momentum that dumbbell raises invite, so members can isolate the muscle and progress the load in small, measurable steps.

How do I set up the Steelflex MDR1300?

Adjust the seat so the shoulders sit level with the pivots, then pull the pop-pins to bring the arm pads in to the shoulder width before selecting a weight.

What warranty does the Steelflex MDR1300 have in India?

Luxe Fitness offers up to 5 years warranty on this machine, covering frame, major moving parts and upholstery on separate terms. Ask us for the warranty card for your exact model before purchase.

What is the price of the Steelflex MDR1300 lateral raise in India?

Pricing depends on the weight stack chosen, delivery location and installation needs. Call +91 80 4112 5757 or send an enquiry for a quote.

Steelflex MDR1300 Lateral Raise features

Movement

• Pop-pin lateral arms: Fine-tune the width to each user’s shoulders.

• Angled inward-facing handles: Align the shoulder joints with the pivots.

• Flat-belt drive: Smooth resistance with a tensile strength above 2,280 kg.

Fit and comfort

• Supportive seat and back pad: Keeps the torso still so the deltoids do the work.

• Thick double-stitched upholstery: 5 cm rebonded foam plus 15 mm high-resilience foam.

Construction

• 50 × 150 mm oval steel frame: Two-coat electrostatic powder finish.

• 97.5 kg weight stack: 143 kg or 189 kg stacks optional, with noise-absorbing cushions and a 4 mm acrylic shroud.

Steelflex MDR1300 Lateral Raise specifications

Allow about 0.6 m of clear space on the user side and 0.5 m around the weight stack.

Steelflex MDR1300 documents

The document below covers the Steelflex MDR1300 Lateral Raise. For the warranty card for your order, call Luxe Fitness on +91 80 4112 5757 or send an enquiry.

Buy the MDR1300 Lateral Raise from Luxe Fitness, Bangalore: call 080 4112 5757 or send an enquiry for price, delivery and installation.