JGPD700 Fly / Rear Deltoid

Brand: Steelflex · Model: JGPD700 · Category: Pin Loaded

The Steelflex JGPD700 Pec Fly / Rear Deltoid is a commercial pec fly and rear-deltoid machine from Steelflex’s Jungle Gym series, built for gyms that want chest flies and rear-shoulder work with multi-angle start positions. Pop-pin adjustable handles switch between chest fly and reverse fly, multi-angle start positions activate the contraction from the right point, and high-density double-stitched pads reduce fatigue through hard sets. It carries a 97.5 kg (215 lb) weight stack as standard and occupies 195 × 127 cm of floor.

• Chest fly and reverse fly in one machine

• Pop-pin adjustable handles

• Multi-angle start positions

• 97.5 kg weight stack

• 195 × 127 cm footprint

The Steelflex JGPD700 is the pec fly and rear-deltoid machine in Steelflex’s Jungle Gym commercial line. Pop-pin adjustable handles set the arms for a chest fly or a reverse fly, the multi-angle start-position design activates the contraction from the point each user needs, and the flexible handles help members master the force through the movement.

Who is this machine for?

The JGPD700 suits commercial gyms, hotel and corporate fitness centres and premium home gyms in India where one machine must cover chest isolation and rear-deltoid work. The high-density pads suit members doing long, intense sessions.

Muscles worked and key exercises

Facing in, the fly isolates the pectoralis major with the anterior deltoids assisting. Facing out, the reverse fly trains the posterior deltoids, rhomboids and middle trapezius, which balance pressing work and improve posture.

Build quality and adjustment

The handles adjust with pop-pins for direction and start angle, the back pad and upholstery are high-density foam with double stitching, and the cable drive runs on 7 × 19 carbon-steel cables rated above 950 kg behind a steel and acrylic shroud.

Like every Jungle Gym machine, it carries a two-coat, electrostatically applied powder finish in black with a vermilion-red texture; 5 cm of rebonded foam under 10 mm of high-density foam with a CGPC PVC cold-latex leather cover, double stitched; dipped PVC handgrips; a cable drive on 7 × 19 carbon-steel cables with a tensile strength above 950 kg; a 1 mm steel and 3 mm acrylic shroud; and low-carbon steel weight plates chosen for rust resistance, low noise and durability.

Space and installation

The JGPD700 measures 195 × 127 × 174 cm (77" × 50" × 68") (L × W × H). Leave about 0.6 m of clear space on the user side for entry and exit and 0.5 m around the weight stack for pin changes. No power is needed. Luxe Fitness delivers, assembles and levels the machine and fits the weight stack on site.

Care and maintenance

Wipe the upholstery, handgrips and shroud after each session. Check the belt, pulleys and pivot bearings monthly, keep the guide rods clean and lightly lubricated as the manual directs, and tighten pad and handle fasteners. Book a service visit if the movement becomes rough or the stack catches on the guide rods.

Why buy from Luxe Fitness?

Luxe Fitness is backed by 28+ years of industry experience through ACME Fitness. We handle delivery, installation, servicing and spare parts across India, and you can see equipment at our showroom at 134/2 KH Road, Shanti Nagar, Bangalore. Warranty runs up to 5 years, with exact terms confirmed for your model.

Frequently asked questions

How do I switch between fly and reverse fly on the Steelflex JGPD700?

Pull the pop-pins on the handles to move the start position, then sit facing the pad for a chest fly or facing away for a reverse fly.

What is the difference between the Steelflex JGPD700 and HPD700?

Both are dual fly and reverse-fly machines with a cable drive. The JGPD700 is the Jungle Gym model with a 97.5 kg stack and multi-angle start positions; the HPD700 is the Hope model with a 95 kg stack.

What warranty does the Steelflex JGPD700 have in India?

Luxe Fitness offers up to 5 years warranty on this machine, covering frame, major moving parts and upholstery on separate terms. Ask us for the warranty card for your exact model before purchase.

What is the price of the Steelflex JGPD700 pec fly / rear deltoid in India?

Pricing depends on the weight stack chosen, delivery location and installation needs. Call +91 80 4112 5757 or send an enquiry for a quote.

Steelflex JGPD700 Pec Fly / Rear Deltoid features

Movement

• Pop-pin adjustable handles: Chest fly or reverse fly.

• Multi-angle start positions: Activate the contraction from the right point.

• Cable drive: 7 × 19 carbon-steel cables with a tensile strength above 950 kg.

Fit and comfort

• Flexible handle design: Mastery of the workout force.

• High-density double-stitched pads: Comfort that reduces fatigue.

Construction

• Black and vermilion-red finish: Two-coat electrostatic powder.

• 97.5 kg weight stack: Low-carbon steel plates behind a 1 mm steel and 3 mm acrylic shroud.

Steelflex JGPD700 Pec Fly / Rear Deltoid specifications

Allow about 0.6 m of clear space on the user side and 0.5 m around the weight stack.

Steelflex JGPD700 documents

The document below covers the Steelflex JGPD700 Pec Fly / Rear Deltoid. For the warranty card for your order, call Luxe Fitness on +91 80 4112 5757 or send an enquiry.

Buy the JGPD700 Fly / Rear Deltoid from Luxe Fitness, Bangalore: call 080 4112 5757 or send an enquiry for price, delivery and installation.