HRM1700 Seated Row

Brand: Steelflex · Model: HRM1700 · Category: Pin Loaded

The Steelflex HRM1700 Seated Row is a commercial seated row machine from Steelflex’s Hope series, built for gyms and fitness centres that want a chest-supported row with independent arms. Diverging movement arms row one side or both together, the cable drive spreads the load evenly, and versatile handgrips reduce wrist stress through a full range of motion. It carries a 95 kg (210 lb) weight stack as standard and occupies 190 × 75 cm of floor.

• Diverging arms, independent or simultaneous

• Cable drive for consistent, even resistance

• Versatile handgrips reduce wrist stress

• 95 kg weight stack

• Narrow 190 × 75 cm footprint

The Steelflex HRM1700 is the seated row in Steelflex’s Hope commercial line. Its cable-driven system delivers a proper, consistent resistance across both diverging movement arms, which can row the back independently or together, and the footplate and chest-supported upholstery keep the body stable while the versatile handgrips take the strain off the wrists through an unmatched range of motion.

Who is this machine for?

The HRM1700 suits commercial gyms, hotel and corporate fitness centres, apartment-complex gyms and home gyms in India that want a row machine members of every level can use. The chest support removes strain from the lower back, which suits beginners and older users, and the 75 cm width fits a narrow floor.

Muscles worked and key exercises

The seated row targets the latissimus dorsi, rhomboids and middle trapezius, with the rear deltoids and biceps assisting. Rowing one arm at a time corrects imbalances and lengthens the range, while the supported position keeps the lower back out of the movement.

Build quality and adjustment

The diverging movement arms are shaped from ergonomics and work independently or simultaneously, the footplate and high-quality upholstery give support and stability, and the handgrips offer several positions to reduce wrist stress. The cable drive runs on 7 × 19 carbon-steel cables rated above 950 kg.

Like every Hope-series machine, it is built with a two-coat, electrostatically applied powder finish; 5 cm of rebonded foam with a CGPC PVC cold-latex leather cover, double stitched; dipped PVC handgrips; a cable drive on 7 × 19 carbon-steel cables with a tensile strength above 950 kg; a 1 mm carbon-steel shroud; and low-carbon steel weight plates chosen for rust resistance, low noise and durability. An instructional placard is fitted to every machine.

Space and installation

The HRM1700 measures 190 × 75 × 138 cm (75" × 29" × 54") (L × W × H). Leave about 0.6 m of clear space on the user side for entry and exit and 0.5 m around the weight stack for pin changes. No power is needed. Luxe Fitness delivers, assembles and levels the machine and fits the weight stack on site.

Care and maintenance

Wipe the upholstery, handgrips and shroud after each session. Check the belt, pulleys and pivot bearings monthly, keep the guide rods clean and lightly lubricated as the manual directs, and tighten pad and handle fasteners. Book a service visit if the movement becomes rough or the stack catches on the guide rods.

Why buy from Luxe Fitness?

Luxe Fitness is backed by 28+ years of industry experience through ACME Fitness. We handle delivery, installation, servicing and spare parts across India, and you can see equipment at our showroom at 134/2 KH Road, Shanti Nagar, Bangalore. Warranty runs up to 5 years, with exact terms confirmed for your model.

Frequently asked questions

Can I row one arm at a time on the Steelflex HRM1700?

Yes. The diverging arms are independent, so each side can be rowed alone to correct imbalances, or both together.

What is the difference between the Steelflex HRM1700 and MRM1700?

Both are chest-supported rows with independent arms. The HRM1700 is the Hope model with a cable drive and 95 kg stack; the MRM1700 is the Mega Power model with a flat-belt drive, angled adjustable foot platform and optional heavier stacks.

What warranty does the Steelflex HRM1700 have in India?

Luxe Fitness offers up to 5 years warranty on this machine, covering frame, major moving parts and upholstery on separate terms. Ask us for the warranty card for your exact model before purchase.

What is the price of the Steelflex HRM1700 seated row in India?

Pricing depends on the weight stack chosen, delivery location and installation needs. Call +91 80 4112 5757 or send an enquiry for a quote.

Steelflex HRM1700 Seated Row features

Movement

• Diverging movement arms: Row one side or both together.

• Full range of motion: Unmatched travel for the seated row.

• Cable drive: 7 × 19 carbon-steel cables with a tensile strength above 950 kg.

Fit and comfort

• Versatile handgrips: Several positions that reduce wrist stress.

• Footplate and chest support: Stability through heavy rows.

• Double-stitched upholstery: 5 cm rebonded foam with a PVC cold-latex cover.

Construction

• Two-coat powder finish: Electrostatically applied.

• 95 kg weight stack: Low-carbon steel plates behind a 1 mm carbon-steel shroud.

Steelflex HRM1700 Seated Row specifications

Allow about 0.6 m of clear space on the user side and 0.5 m around the weight stack.

Steelflex HRM1700 documents

The document below covers the Steelflex HRM1700 Seated Row. For the warranty card for your order, call Luxe Fitness on +91 80 4112 5757 or send an enquiry.

Buy the HRM1700 Seated Row from Luxe Fitness, Bangalore: call 080 4112 5757 or send an enquiry for price, delivery and installation.