HOT1800 Rotary Torso

Brand: Steelflex · Model: HOT1800 · Category: Pin Loaded

The Steelflex HOT1800 Rotary Torso is a commercial rotary torso machine from Steelflex’s Hope series, built for gyms and fitness centres that want a loaded rotation movement for the core. Oversized slip-resistant foot pedals with knee pads keep the upper body aligned with the spine, a revolving pivot foot rack gives a smooth rotation, and the swivel allows a full range for every ability. It carries a 95 kg (210 lb) weight stack as standard and occupies 133 × 104 cm of floor.

• Loaded rotation for the obliques

• Oversized slip-resistant pedals with knee pads

• Revolving pivot foot rack and full-range swivel

• 95 kg weight stack

• 133 × 104 cm footprint

The Steelflex HOT1800 is the rotary torso in Steelflex’s Hope commercial line, built for abdominal and oblique development through a controlled twisting movement. Oversized foot pedals with a slip-resistant design and knee pads stabilise the lower body so the upper body stays aligned with the spine, and the revolving pivot foot rack and swivel give a smooth, full-range rotation for members of every ability.

Who is this machine for?

The HOT1800 suits commercial gyms, hotel and corporate fitness centres, sports-conditioning rooms and home gyms in India that want to train rotational strength for golf, tennis, cricket and everyday movement.

Muscles worked and key exercises

The rotary torso targets the internal and external obliques, with the transverse abdominis and deep spinal rotators assisting. Rotation is the one plane most core machines ignore, and loading it with a measured stack builds the trunk strength that sport and lifting demand.

Build quality and adjustment

The knee pads and oversized foot pedals lock the hips and legs in place so the rotation comes from the trunk, the revolving pivot foot rack keeps the motion fluid, and the swivel sets the range of rotation. The cable drive runs on 7 × 19 carbon-steel cables rated above 950 kg behind a 1 mm carbon-steel shroud.

Like every Hope-series machine, it is built with a two-coat, electrostatically applied powder finish; 5 cm of rebonded foam with a CGPC PVC cold-latex leather cover, double stitched; dipped PVC handgrips; a cable drive on 7 × 19 carbon-steel cables with a tensile strength above 950 kg; a 1 mm carbon-steel shroud; and low-carbon steel weight plates chosen for rust resistance, low noise and durability. An instructional placard is fitted to every machine.

Space and installation

The HOT1800 measures 133 × 104 × 138 cm (52" × 41" × 54") (L × W × H). Leave about 0.6 m of clear space on the user side for entry and exit and 0.5 m around the weight stack for pin changes. No power is needed. Luxe Fitness delivers, assembles and levels the machine and fits the weight stack on site.

Care and maintenance

Wipe the upholstery, handgrips and shroud after each session. Check the belt, pulleys and pivot bearings monthly, keep the guide rods clean and lightly lubricated as the manual directs, and tighten pad and handle fasteners. Book a service visit if the movement becomes rough or the stack catches on the guide rods.

Why buy from Luxe Fitness?

Luxe Fitness is backed by 28+ years of industry experience through ACME Fitness. We handle delivery, installation, servicing and spare parts across India, and you can see equipment at our showroom at 134/2 KH Road, Shanti Nagar, Bangalore. Warranty runs up to 5 years, with exact terms confirmed for your model.

Frequently asked questions

Is a rotary torso machine safe for the lower back?

Yes when the knee pads and pedals are set correctly: they hold the hips still so the rotation happens in the trunk under control, not in the lumbar spine under momentum. Start light and rotate slowly.

What is the difference between the Steelflex HOT1800 and MOT1800?

Both are seated rotary torso machines. The HOT1800 is the Hope model with a cable drive, foot pedals and knee pads; the MOT1800 is the Mega Power model with thigh pads, a belt drive and optional heavier stacks.

What warranty does the Steelflex HOT1800 have in India?

Luxe Fitness offers up to 5 years warranty on this machine, covering frame, major moving parts and upholstery on separate terms. Ask us for the warranty card for your exact model before purchase.

What is the price of the Steelflex HOT1800 rotary torso in India?

Pricing depends on the weight stack chosen, delivery location and installation needs. Call +91 80 4112 5757 or send an enquiry for a quote.

Steelflex HOT1800 Rotary Torso features

Movement

• Full-range swivel: Rotation to either side for every fitness level.

• Revolving pivot foot rack: Smooth, fluid motion throughout.

• Cable drive: 7 × 19 carbon-steel cables with a tensile strength above 950 kg.

Fit and safety

• Oversized slip-resistant pedals: Stabilise the lower body.

• Knee pads: Keep the upper body aligned with the spine.

Construction

• Two-coat powder finish: Electrostatically applied.

• 95 kg weight stack: Low-carbon steel plates behind a 1 mm carbon-steel shroud.

Steelflex HOT1800 Rotary Torso specifications

Allow about 0.6 m of clear space on the user side and 0.5 m around the weight stack.

Steelflex HOT1800 documents

The document below covers the Steelflex HOT1800 Rotary Torso. For the warranty card for your order, call Luxe Fitness on +91 80 4112 5757 or send an enquiry.

Buy the HOT1800 Rotary Torso from Luxe Fitness, Bangalore: call 080 4112 5757 or send an enquiry for price, delivery and installation.