HLM300B High / Low Pull

Brand: Steelflex · Model: HLM300B · Category: Pin Loaded

The Steelflex HLM300B High / Low Pull is a commercial high and low pull machine from Steelflex’s Hope series, built for gyms and fitness centres that want lat pulldowns and low rows from one seat. Members switch between the high pull and the low pull without leaving the seat, foot braces with knee pads keep the body aligned, and the low-pull handgrip gives a steadier pull-back. It carries a 95 kg (210 lb) weight stack as standard and occupies 207 × 120 cm of floor.

• High pull and low pull from one seated position

• Foot braces with knee pads for alignment

• Dedicated low-pull handgrip

• 95 kg weight stack

• 207 × 120 cm footprint

The Steelflex HLM300B is the high/low pull in Steelflex’s Hope commercial line, combining a lat pulldown and a low row in one machine so that one seat builds the arms, back and shoulders. Foot braces with knee pads hold the body in alignment for both pulls, and members can change from the high pulley to the low pulley instantly without moving.

Who is this machine for?

The HLM300B suits commercial gyms, hotel and corporate fitness centres, apartment-complex gyms and home gyms in India that want to cover vertical and horizontal pulling without buying two machines. It is a natural centrepiece for a smaller back-training area.

Muscles worked and key exercises

The high pull targets the latissimus dorsi with the biceps and rear deltoids assisting; the low pull targets the middle back, rhomboids and lats with the biceps assisting. Together they build the whole back and balance the gym’s pressing machines.

Build quality and adjustment

The foot braces with knee pads support body alignment through heavy rows and pulldowns, the low-pull handgrip is shaped for a steady pull-back, and the cable drive runs on 7 × 19 carbon-steel cables rated above 950 kg. The 95 kg stack sits behind a 1 mm carbon-steel shroud.

Like every Hope-series machine, it is built with a two-coat, electrostatically applied powder finish; 5 cm of rebonded foam with a CGPC PVC cold-latex leather cover, double stitched; dipped PVC handgrips; a cable drive on 7 × 19 carbon-steel cables with a tensile strength above 950 kg; a 1 mm carbon-steel shroud; and low-carbon steel weight plates chosen for rust resistance, low noise and durability. An instructional placard is fitted to every machine.

Space and installation

The HLM300B measures 207 × 120 × 220 cm (82" × 47" × 87") (L × W × H). Leave about 0.6 m of clear space on the user side for entry and exit and 0.5 m around the weight stack for pin changes. No power is needed. Luxe Fitness delivers, assembles and levels the machine and fits the weight stack on site.

Care and maintenance

Wipe the upholstery, handgrips and shroud after each session. Check the belt, pulleys and pivot bearings monthly, keep the guide rods clean and lightly lubricated as the manual directs, and tighten pad and handle fasteners. Book a service visit if the movement becomes rough or the stack catches on the guide rods.

Why buy from Luxe Fitness?

Luxe Fitness is backed by 28+ years of industry experience through ACME Fitness. We handle delivery, installation, servicing and spare parts across India, and you can see equipment at our showroom at 134/2 KH Road, Shanti Nagar, Bangalore. Warranty runs up to 5 years, with exact terms confirmed for your model.

Frequently asked questions

Can two people use the Steelflex HLM300B at once?

No. Both pulleys share one weight stack, so one user trains at a time, switching between pulldowns and rows from the same seat.

What is the difference between the Steelflex HLM300B and MLM300B?

Both combine a lat pulldown and seated row. The HLM300B is the Hope model with a cable drive and a 95 kg stack; the MLM300B is the Mega Power model with a flat-belt drive, 97.5 kg stack and optional heavier stacks.

What warranty does the Steelflex HLM300B have in India?

Luxe Fitness offers up to 5 years warranty on this machine, covering frame, major moving parts and upholstery on separate terms. Ask us for the warranty card for your exact model before purchase.

What is the price of the Steelflex HLM300B high / low pull in India?

Pricing depends on the weight stack chosen, delivery location and installation needs. Call +91 80 4112 5757 or send an enquiry for a quote.

Steelflex HLM300B High / Low Pull features

Movement

• High pulley: Lat pulldowns for the back and arms.

• Low pulley: Seated rows with a dedicated low-pull handgrip.

• Cable drive: 7 × 19 carbon-steel cables with a tensile strength above 950 kg.

Fit and safety

• Foot braces with knee pads: Body alignment for both movements.

• Single seated position: Exchange between pulls instantly.

Construction

• Two-coat powder finish: Electrostatically applied.

• 95 kg weight stack: Low-carbon steel plates behind a 1 mm carbon-steel shroud.

Steelflex HLM300B High / Low Pull specifications

Allow about 0.6 m of clear space on the user side and 0.5 m around the weight stack.

Steelflex HLM300B documents

The document below covers the Steelflex HLM300B High / Low Pull. For the warranty card for your order, call Luxe Fitness on +91 80 4112 5757 or send an enquiry.

Buy the HLM300B High / Low Pull from Luxe Fitness, Bangalore: call 080 4112 5757 or send an enquiry for price, delivery and installation.