HLM300 Lat Pulldown

Brand: Steelflex · Model: HLM300 · Category: Pin Loaded

The Steelflex HLM300 Lat Pulldown is a commercial lat pulldown machine from Steelflex’s Hope series, built for gyms and fitness centres that want a pulldown with independent diverging arms. Rotating handles on independent diverging movement arms give a natural, fluid pull, pop-pin adjustment and fully shrouded stacks keep training safe, and an advanced foot support steadies the body through the movement. It carries a 95 kg (210 lb) weight stack as standard and occupies 169 × 75 cm of floor.

• Independent diverging arms with rotating handles

• Pop-pin adjustment and fully shrouded stack

• Advanced foot support for a steady pull

• 95 kg weight stack

• Narrow 169 × 75 cm footprint

The Steelflex HLM300 is the lat pulldown in Steelflex’s Hope commercial line, aimed at the latissimus dorsi and biceps. Instead of a single bar, it uses two independent movement arms that diverge as the user pulls, each with an ergonomic rotating handle, so the pulldown follows the natural path of the arms, and an advanced foot support keeps the body steady under load.

Who is this machine for?

The HLM300 suits commercial gyms, hotel and corporate fitness centres, apartment-complex gyms and home gyms in India that want a pulldown members can use unilaterally as well as with both arms. Its 75 cm width is one of the narrowest in its class, which helps on a tight floor.

Muscles worked and key exercises

The lat pulldown targets the latissimus dorsi, with the biceps, rear deltoids, rhomboids and lower trapezius assisting. Independent arms let members pull one side at a time to correct imbalances, and the rotating handles let the wrists turn naturally through the pull for less elbow strain.

Build quality and adjustment

The diverging movement arms work independently, the rotating handles are shaped from ergonomics, pop-pin adjustment sets the thigh pads and the weight stack is fully shrouded for safety. The cable drive runs on 7 × 19 carbon-steel cables rated above 950 kg.

Like every Hope-series machine, it is built with a two-coat, electrostatically applied powder finish; 5 cm of rebonded foam with a CGPC PVC cold-latex leather cover, double stitched; dipped PVC handgrips; a cable drive on 7 × 19 carbon-steel cables with a tensile strength above 950 kg; a 1 mm carbon-steel shroud; and low-carbon steel weight plates chosen for rust resistance, low noise and durability. An instructional placard is fitted to every machine.

Space and installation

The HLM300 measures 169 × 75 × 216 cm (66" × 29" × 85") (L × W × H). Leave about 0.6 m of clear space on the user side for entry and exit and 0.5 m around the weight stack for pin changes. No power is needed. Luxe Fitness delivers, assembles and levels the machine and fits the weight stack on site.

Care and maintenance

Wipe the upholstery, handgrips and shroud after each session. Check the belt, pulleys and pivot bearings monthly, keep the guide rods clean and lightly lubricated as the manual directs, and tighten pad and handle fasteners. Book a service visit if the movement becomes rough or the stack catches on the guide rods.

Why buy from Luxe Fitness?

Luxe Fitness is backed by 28+ years of industry experience through ACME Fitness. We handle delivery, installation, servicing and spare parts across India, and you can see equipment at our showroom at 134/2 KH Road, Shanti Nagar, Bangalore. Warranty runs up to 5 years, with exact terms confirmed for your model.

Frequently asked questions

What is the difference between the Steelflex HLM300 and MLM300?

The HLM300 uses two independent diverging arms with rotating handles on a cable drive; the MLM300 is the Mega Power pulldown with a single rotating handle on a belt drive and optional heavier stacks.

How tall a ceiling does the Steelflex HLM300 need?

The machine is 216 cm tall, so allow at least 2.4 m of ceiling height for installation and pin changes.

What warranty does the Steelflex HLM300 have in India?

Luxe Fitness offers up to 5 years warranty on this machine, covering frame, major moving parts and upholstery on separate terms. Ask us for the warranty card for your exact model before purchase.

What is the price of the Steelflex HLM300 lat pulldown in India?

Pricing depends on the weight stack chosen, delivery location and installation needs. Call +91 80 4112 5757 or send an enquiry for a quote.

Steelflex HLM300 Lat Pulldown features

Movement

• Independent diverging arms: Natural, fluid pull with one arm or both.

• Rotating ergonomic handles: Wrists turn naturally through the movement.

• Cable drive: 7 × 19 carbon-steel cables with a tensile strength above 950 kg.

Fit and safety

• Pop-pin adjustment: Thigh pads set quickly for any user.

• Advanced foot support: Steadier pulldowns and better efficiency.

• Fully shrouded weight stack: Training safety on a shared floor.

Construction

• Two-coat powder finish: Electrostatically applied.

• 95 kg weight stack: Low-carbon steel plates behind a 1 mm carbon-steel shroud.

Steelflex HLM300 Lat Pulldown specifications

Allow about 0.6 m of clear space on the user side and 0.5 m around the weight stack.

Steelflex HLM300 documents

The document below covers the Steelflex HLM300 Lat Pulldown. For the warranty card for your order, call Luxe Fitness on +91 80 4112 5757 or send an enquiry.

Buy the HLM300 Lat Pulldown from Luxe Fitness, Bangalore: call 080 4112 5757 or send an enquiry for price, delivery and installation.