HLE200 Leg Extension

Brand: Steelflex · Model: HLE200 · Category: Pin Loaded

The Steelflex HLE200 Leg Extension is a commercial seated leg extension machine from Steelflex’s Hope series, built for gyms and fitness centres that want a cable-driven quad machine with a professional range dial. Adjustable tibia rollers and a streamlined back pad set a correct, stable posture, and a professional dial sets the lifting range without any loss of resistance. It carries a 95 kg (210 lb) weight stack as standard and occupies 122 × 118 cm of floor.

• Cable-driven quadriceps extension

• Adjustable tibia rollers and streamlined back pad

• Professional range dial with no power loss

• 95 kg weight stack

• Compact 122 × 118 cm footprint

The Steelflex HLE200 is the seated leg extension in Steelflex’s Hope commercial line. Its cable-driven system delivers a proper resistance that strengthens the quadriceps safely and efficiently, the tibia rollers and back pad adjust to hold the user in a correct, stable posture, and a professional dial sets the start of the lifting range without reducing the load.

Who is this machine for?

The HLE200 suits commercial gyms, hotel and corporate fitness centres, physiotherapy settings and home gyms in India that want to isolate the quadriceps in a small footprint. The range dial makes partial-range work possible for members rebuilding knee strength.

Muscles worked and key exercises

The leg extension isolates the quadriceps, all four heads, with no help from the glutes or hamstrings. It is the standard machine for quad hypertrophy, for strengthening the knee after injury under a physiotherapist’s guidance, and for pre-exhausting the quads before presses.

Build quality and adjustment

The tibia rollers adjust to leg length, the streamlined back pad gives better stability and fit, and the professional dial sets the range so the lifting movement starts where the user needs it. The cable drive runs on 7 × 19 carbon-steel cables rated above 950 kg behind a 1 mm carbon-steel shroud.

Like every Hope-series machine, it is built with a two-coat, electrostatically applied powder finish; 5 cm of rebonded foam with a CGPC PVC cold-latex leather cover, double stitched; dipped PVC handgrips; a cable drive on 7 × 19 carbon-steel cables with a tensile strength above 950 kg; a 1 mm carbon-steel shroud; and low-carbon steel weight plates chosen for rust resistance, low noise and durability. An instructional placard is fitted to every machine.

Space and installation

The HLE200 measures 122 × 118 × 138 cm (48" × 46" × 54") (L × W × H). Leave about 0.6 m of clear space on the user side for entry and exit and 0.5 m around the weight stack for pin changes. No power is needed. Luxe Fitness delivers, assembles and levels the machine and fits the weight stack on site.

Care and maintenance

Wipe the upholstery, handgrips and shroud after each session. Check the belt, pulleys and pivot bearings monthly, keep the guide rods clean and lightly lubricated as the manual directs, and tighten pad and handle fasteners. Book a service visit if the movement becomes rough or the stack catches on the guide rods.

Why buy from Luxe Fitness?

Luxe Fitness is backed by 28+ years of industry experience through ACME Fitness. We handle delivery, installation, servicing and spare parts across India, and you can see equipment at our showroom at 134/2 KH Road, Shanti Nagar, Bangalore. Warranty runs up to 5 years, with exact terms confirmed for your model.

Frequently asked questions

What is the difference between the Steelflex HLE200 and HLE200B?

Both are Hope leg extensions with the same stack. The HLE200 uses adjustable tibia rollers and a streamlined back pad with a professional dial; the HLE200B adds an adjustable lifting rod and a multidirectional dial for a wider choice of start positions.

What is the difference between the Steelflex HLE200 and MLE200?

The HLE200 is the Hope model with a cable drive and 95 kg stack; the MLE200 is the Mega Power model with a belt drive, seated start adjustment and optional heavier stacks.

What warranty does the Steelflex HLE200 have in India?

Luxe Fitness offers up to 5 years warranty on this machine, covering frame, major moving parts and upholstery on separate terms. Ask us for the warranty card for your exact model before purchase.

What is the price of the Steelflex HLE200 leg extension in India?

Pricing depends on the weight stack chosen, delivery location and installation needs. Call +91 80 4112 5757 or send an enquiry for a quote.

Steelflex HLE200 Leg Extension features

Movement

• Professional range dial: Set the start of the lift with no power reduction.

• Cable drive: 7 × 19 carbon-steel cables with a tensile strength above 950 kg.

Fit and comfort

• Adjustable tibia rollers: Fit different leg lengths.

• Streamlined back pad: Stability and correct posture.

Construction

• Two-coat powder finish: Electrostatically applied.

• 95 kg weight stack: Low-carbon steel plates behind a 1 mm carbon-steel shroud.

Steelflex HLE200 Leg Extension specifications

Allow about 0.6 m of clear space on the user side and 0.5 m around the weight stack.

Steelflex HLE200 documents

The document below covers the Steelflex HLE200 Leg Extension. For the warranty card for your order, call Luxe Fitness on +91 80 4112 5757 or send an enquiry.

Buy the HLE200 Leg Extension from Luxe Fitness, Bangalore: call 080 4112 5757 or send an enquiry for price, delivery and installation.