HDR1300 Lateral Raise

Brand: Steelflex · Model: HDR1300 · Category: Pin Loaded

The Steelflex HDR1300 Lateral Raise is a commercial lateral raise machine from Steelflex’s Hope series, built for gyms and fitness centres that want a deltoid isolation machine for every ability. Counter-balanced arms and a start-position adjustment make the raise comfortable at every level, downward handgrips with oversized rollers support the elbows, and a magnetic pop-pin adjusts the stack and upholstery easily. It carries a 95 kg (210 lb) weight stack as standard and occupies 146 × 77 cm of floor.

• Counter-balanced movement arms

• Start-position adjustment for every ability

• Oversized elbow rollers and downward handgrips

• 95 kg weight stack with magnetic pop-pin

• 146 × 77 cm footprint

The Steelflex HDR1300 is the lateral raise in Steelflex’s Hope commercial line, built to isolate the side deltoids comfortably for members of different fitness abilities. Counter-balance pieces remove the dead weight of the arms, the start position adjusts to each user, and downward handgrips with oversized rollers support the elbows through the raise.

Who is this machine for?

The HDR1300 suits commercial gyms, hotel and corporate fitness centres, apartment-complex gyms and home gyms in India that want to round out a shoulder circuit. Its narrow 77 cm footprint fits beside larger machines, and the magnetic pop-pins make adjustment quick for a shared floor.

Muscles worked and key exercises

The lateral raise isolates the lateral (middle) deltoid, the muscle that gives the shoulders their width, with the supraspinatus and upper trapezius assisting. Because the elbows rest on the rollers, the machine keeps tension on the deltoid through the whole arc where dumbbells lose it at the bottom.

Build quality and adjustment

The counter-balance pieces and start-position adjustment set the arms for each user, the oversized rollers and downward handgrips support the elbows, and magnetic pop-pins adjust the weight stack and upholstery in seconds. The cable drive runs on 7 × 19 carbon-steel cables rated above 950 kg.

Like every Hope-series machine, it is built with a two-coat, electrostatically applied powder finish; 5 cm of rebonded foam with a CGPC PVC cold-latex leather cover, double stitched; dipped PVC handgrips; a cable drive on 7 × 19 carbon-steel cables with a tensile strength above 950 kg; a 1 mm carbon-steel shroud; and low-carbon steel weight plates chosen for rust resistance, low noise and durability. An instructional placard is fitted to every machine.

Space and installation

The HDR1300 measures 146 × 77 × 138 cm (58" × 30" × 54") (L × W × H). Leave about 0.6 m of clear space on the user side for entry and exit and 0.5 m around the weight stack for pin changes. No power is needed. Luxe Fitness delivers, assembles and levels the machine and fits the weight stack on site.

Care and maintenance

Wipe the upholstery, handgrips and shroud after each session. Check the belt, pulleys and pivot bearings monthly, keep the guide rods clean and lightly lubricated as the manual directs, and tighten pad and handle fasteners. Book a service visit if the movement becomes rough or the stack catches on the guide rods.

Why buy from Luxe Fitness?

Luxe Fitness is backed by 28+ years of industry experience through ACME Fitness. We handle delivery, installation, servicing and spare parts across India, and you can see equipment at our showroom at 134/2 KH Road, Shanti Nagar, Bangalore. Warranty runs up to 5 years, with exact terms confirmed for your model.

Frequently asked questions

Why use a lateral raise machine instead of dumbbells?

The machine keeps resistance on the side deltoid through the whole movement and removes the momentum that dumbbell raises invite, so members can isolate the muscle and progress the load in small, measurable steps.

What is the difference between the Steelflex HDR1300 and MDR1300?

Both isolate the lateral deltoids. The HDR1300 is the Hope model with counter-balanced arms, elbow rollers, a cable drive and a 95 kg stack; the MDR1300 is the Mega Power model with pop-pin width-adjustable arms, a belt drive and optional heavier stacks.

What warranty does the Steelflex HDR1300 have in India?

Luxe Fitness offers up to 5 years warranty on this machine, covering frame, major moving parts and upholstery on separate terms. Ask us for the warranty card for your exact model before purchase.

What is the price of the Steelflex HDR1300 lateral raise in India?

Pricing depends on the weight stack chosen, delivery location and installation needs. Call +91 80 4112 5757 or send an enquiry for a quote.

Steelflex HDR1300 Lateral Raise features

Movement

• Counter-balanced movement arms: Comfortable deltoid raises at every level.

• Start-position adjustment: Meets different workout requirements.

• Cable drive: 7 × 19 carbon-steel cables with a tensile strength above 950 kg.

Fit and comfort

• Oversized elbow rollers: Support the elbow through the raise.

• Magnetic pop-pins: Quick adjustment of stack and upholstery.

• Double-stitched upholstery: 5 cm rebonded foam with a PVC cold-latex cover.

Construction

• Two-coat powder finish: Electrostatically applied.

• 95 kg weight stack: Low-carbon steel plates behind a 1 mm carbon-steel shroud.

Steelflex HDR1300 Lateral Raise specifications

Allow about 0.6 m of clear space on the user side and 0.5 m around the weight stack.

Steelflex HDR1300 documents

The document below covers the Steelflex HDR1300 Lateral Raise. For the warranty card for your order, call Luxe Fitness on +91 80 4112 5757 or send an enquiry.

Buy the HDR1300 Lateral Raise from Luxe Fitness, Bangalore: call 080 4112 5757 or send an enquiry for price, delivery and installation.