HBC600 Biceps Curl

Brand: Steelflex · Model: HBC600 · Category: Pin Loaded

The Steelflex HBC600 Biceps Curl is a commercial seated biceps curl machine from Steelflex’s Hope series, built for gyms and fitness centres that want a cable-driven curl with full elbow support. An angled high-density elbow pad keeps the forearms aligned with the pivots, and oversized handles on a cable drive give a fluid curling path. It carries a 50 kg (110 lb) weight stack as standard and occupies 147 × 75 cm of floor.

• Angled high-density elbow pad

• Oversized handles on a cable drive

• Forearms aligned with the pivots

• 50 kg weight stack

• Narrow 147 × 75 cm footprint

The Steelflex HBC600 is the seated biceps curl in Steelflex’s Hope commercial line, aimed squarely at building the power and strength of the biceps. An angled elbow pad of high-density foam supports the forearms and keeps them in line with the pivot points, and the cable-driven oversized handles give a fluid curling path from full extension to full contraction.

Who is this machine for?

The HBC600 suits commercial gyms, hotel and corporate fitness centres, apartment-complex gyms and home gyms in India that want a safe, repeatable curl for members of every level. The 50 kg stack is sized for an isolation movement, and the 75 cm width fits a narrow floor.

Muscles worked and key exercises

The curl isolates the biceps brachii with the brachialis and brachioradialis assisting. With the upper arms fixed on the pad, the shoulders cannot swing the weight, so the biceps take the whole load.

Build quality and adjustment

The angled elbow pad is high-density foam shaped to support the forearms, the oversized handles are easy to hold, and the cable drive on 7 × 19 carbon-steel cables rated above 950 kg keeps resistance smooth from the first pin. The 50 kg stack sits behind a 1 mm carbon-steel shroud.

Like every Hope-series machine, it is built with a two-coat, electrostatically applied powder finish; 5 cm of rebonded foam with a CGPC PVC cold-latex leather cover, double stitched; dipped PVC handgrips; a cable drive on 7 × 19 carbon-steel cables with a tensile strength above 950 kg; a 1 mm carbon-steel shroud; and low-carbon steel weight plates chosen for rust resistance, low noise and durability. An instructional placard is fitted to every machine.

Space and installation

The HBC600 measures 147 × 75 × 138 cm (58" × 29" × 54") (L × W × H). Leave about 0.6 m of clear space on the user side for entry and exit and 0.5 m around the weight stack for pin changes. No power is needed. Luxe Fitness delivers, assembles and levels the machine and fits the weight stack on site.

Care and maintenance

Wipe the upholstery, handgrips and shroud after each session. Check the belt, pulleys and pivot bearings monthly, keep the guide rods clean and lightly lubricated as the manual directs, and tighten pad and handle fasteners. Book a service visit if the movement becomes rough or the stack catches on the guide rods.

Why buy from Luxe Fitness?

Luxe Fitness is backed by 28+ years of industry experience through ACME Fitness. We handle delivery, installation, servicing and spare parts across India, and you can see equipment at our showroom at 134/2 KH Road, Shanti Nagar, Bangalore. Warranty runs up to 5 years, with exact terms confirmed for your model.

Frequently asked questions

Is a 50 kg stack enough for a biceps curl machine?

Yes. A curl isolates one small muscle group, and 50 kg on a cable curl is a heavy load for almost every member; most users train well below the top pin.

What is the difference between the Steelflex HBC600 and MBC600?

Both are seated curls with an elbow pad. The HBC600 is the Hope model with a cable drive and 50 kg stack; the MBC600 is the Mega Power model with pop-pin start positions, rotating handles, a belt drive and a 97.5 kg stack.

What warranty does the Steelflex HBC600 have in India?

Luxe Fitness offers up to 5 years warranty on this machine, covering frame, major moving parts and upholstery on separate terms. Ask us for the warranty card for your exact model before purchase.

What is the price of the Steelflex HBC600 biceps curl in India?

Pricing depends on the weight stack chosen, delivery location and installation needs. Call +91 80 4112 5757 or send an enquiry for a quote.

Steelflex HBC600 Biceps Curl features

Movement

• Fluid curl path: Oversized handles on a cable drive.

• Pivot alignment: Elbow pad keeps the forearms in line with the pivots.

• Cable drive: 7 × 19 carbon-steel cables with a tensile strength above 950 kg.

Fit and comfort

• Angled high-density elbow pad: Comfort and support for the forearms.

• Adjustable seat: Sets the elbows on the pad at the right height.

Construction

• Two-coat powder finish: Electrostatically applied.

• 50 kg weight stack: Low-carbon steel plates behind a 1 mm carbon-steel shroud.

Steelflex HBC600 Biceps Curl specifications

Allow about 0.6 m of clear space on the user side and 0.5 m around the weight stack.

Steelflex HBC600 documents

The document below covers the Steelflex HBC600 Biceps Curl. For the warranty card for your order, call Luxe Fitness on +91 80 4112 5757 or send an enquiry.

Buy the HBC600 Biceps Curl from Luxe Fitness, Bangalore: call 080 4112 5757 or send an enquiry for price, delivery and installation.